================================ ExacqVision Calculator Changelog ================================ v1.30.211014 * Fixed an issue where importing a saved configuration could sometimes reset stored framerate values. v1.30.210818 & Fixed an issue with displaying the correct compression type in saved configurations. v1.30.210312 * Removed "additional options" from the PDF export. v1.30.210215 * Added support for new G-Series models. * Removed support for LC models. v1.29.201021 * Added support for Q-Series systems. v1.28.200915 * Added new hardware upgrade options. v1.28.200724 * Bug fixes. v1.28.200716 * Added support for OS on RAID options. v1.27.200403 * Added Tyco AI part numbers to options. v1.26.200313 * Added Tyco HD Encoders to the bill of materials if selected in step 1. * Added EM Servers as server options. * Fixed issues with displaying G-Series systems. v1.25.092419 * Fixed an issue with encoders not generating the proper storage. v1.25.091619 * Added ability to select more rackmount rails than systems selected. * Fixed issue where cameras requiring multiple licenses would not properly display the license total. v1.24.082619 * Added C-Series part numbers as server options. v1.24.052119 * Bug fixes for G-Series filters. v1.24.042219 * Added G-Series to the UI. v1.24.041719 * Removed Enterprise w/ ESM filters. * Added EM Series as an available option. v1.23.040219 * Ended lifetime SSA promotion. * Fixed several issues with loading saved configurations. * Fixed an issue where data rates could display an invalid value. * Fixed an issue where the wrong part number was displayed for Cloud Drive. v1.22.013118 * Option compatibility fixes. v1.22.012318 * Updating Cloud Drive license calculation. v1.22.122018 * Added Cloud Drive configuration options. v1.21.050318 * Standardized units of measure across entire tool. * Removed warning about old configurations being incompatible with recent changes. * Removed restrictions on resolutions when selecting a specific camera. * Removed framerate restrictions per camera. v1.20.040618 * Fixed an issue with incomaptible options not properly respecting pre-selected features * Fixed an issue where discounts were not properly applying * Fixed an issue with determining SSA counts v1.19.050118 * Fixed an issue with incompatible options not properly interacting. v1.18.171101 * Added new data rates for full catalog of cameras. * Removed manufacturers without any tested cameras. * Added "Scene Activity" field. * Deprecating "Low Light" field for all but Arecont cameras. * Modified add camera buttons. v1.17.170929 * Updated Hard Drive option configuration. * Updated SSA increment values. * Fixed incompatibilites with several options for A-Series models. v1.16.170713 * Added support for START-EVENIP option. v1.16.170614 * Added 6MP camera option. * Fixed an issue with multi-sensor cameras. v1.16.170418 * Added support for H.265 video compression. * Fixed several issues related to encoder licensing and data rates. v1.15.170314 * Fixed an issue where timelapse recording time would estimate too much storage. * Fixed an issue where encoders would improbably produce an incorrect storage data rate * Fixed an issue with M-Series upgrade licenses. v1.14.0203171 * Added 9M camera option. v1.14.7015 * Added support for M-Series hardware. * Added 15M camera option. * Fixed a bug where any jquery trigger would cause the page to jump. * Fixed an incompatibility bug between quad-NIC and Windows Server upgrades. * Fixed an issue with inconsistent data rates for multi-channel encoders. v1.13.6765 * Added 4M option to cameras. * Tweaked how licensing is applied to multi-sensor cameras and encoders. v1.13.6714 * Added Illustra Flex data rates. * Added option to increase SSA by license count. v1.13.6544 * Added filters for CSA and Kantech Onboard options. v1.13.6458 * Added full Arecont data table. * Fixed an issue with imported configurations resetting framerates. * Fixed an issue where bad configuration numbers would display an empty camera table instead of a warning. v1.13.6383 * Added updated Enterprise licensing process. v1.12.6298 * Added toggle for Una systems. * Added additional checks to pricing levels. * Added UI tweaks to smooth Illustra tool import. * Updated data files to use updated database classes. * Updated a handful of jQuery commands. * Fixed a bug where some systems would improperly display when raid storage was slightly too low. v1.11.6053 * Added 33 megapixel option for cameras. * Updated Quad NIC options. * Updated help text for new recording hours display. v1.11.5887 * Added more accurate frame size data for IP camera calculations. * Added support for individual camera manufacturer data, starting with Illustra. * Added support for upcoming LC updates. * Fixed an issue where some cameras would default to the wrong resolution. * Fixed an issue where 2UA raid systems were not appearing in the compatibility list. v1.10.5671 * Updated enterprise licensing calculations. v1.10.5338 * All Z-Series models now automatically include a rackmount kit. * Adjusted storage formula to account for RAID being an option and not a seperate part for A series parts. * Fixed an issue with a small handful of cameras defaulting to the wrong resolution. * Fixed an issue where Enterprise SSAs were not properly calculated. * Fixed an issue where IP-Z models were incorrectly requiring the IO module part number. * Fixed an issue where a blank string would break the analog camera count for each server. v1.9.4784 * Fixed an issue with LC pro/enterprise licensing. v1.9.4596 * Added support for E-Series encoders. * Added spec sheet and product page links for the selected system during step 5. * Added a warning when ESM is selected, but not all systems are quoted with Enterprise licenses. * Removed the "View Camera Integration Page" button for being redundant. * Fixed an issue with calculating Enterprise and ESM licenses. * Fixed issues with the footer formatting in the PDF. * Updated design to better match exacq.com themes. * Replaced third-party selectmenu plugin with the integrated jQuery-UI version. v1.8.4050 * Bug fixes for step 2 sorting. v1.8.3996 * Added a link to the camera integration page for additional help selecting cameras. * Project names now display as the header/filename for PDF exports. * Added the ability to add an Enterprise license to LC models. * Added better support for software-only configurations. * Updated contact information. v1.7.3406 * Fixed a bug where adding server audio channels would suggest IP systems. * Updated support for Start to Pro upgrades. * Updated contact information for Latin America. * Removed permalink button and built the functionality into the save dialog. v1.7.3251 * Added support for ELP systems. * Rearranged directory structure. v1.6.3160 * Added USB-IO Module * Properly configured EL systems with rackmounts to show rackmountable. v1.6.2900 * Fixed an issue where the enterprise option was not automatically selected if health or enterprise was checked in step 2. * Swapped EHM-01 with the new EVESM part. v1.6.2786 * Removed HD-SDI listings across the boar. * You can no longer select more than one CPU upgrade for A-Series servers. v1.6.2402 * Removed HD-SDI camera option from the camera type list. * Fixed a bug where IP licenses weren't being automatically added to systems. v1.6.2388 * Added 40MP option for cameras. * Tweaked 20MP data rates. * Options are now pulled directly from the product catalog. * Code cleanup and optimization in utils.php. v1.6.2212 * Added LC Series configurations. * Added a permalink for the saved configuration. * Fixed a bug where software-only configurations included the wrong number of licenses for certain encoders. v1.5.1834 * "Will Host Client Server" is now selected by default. * Improved benchmarks for storage data rates. * Converted storage data rates to Mbps to maintain consistency. * Updated option part number descriptions, and added several new parts. * Fixed a bug where loading a configuration refused to find the maximum number of streams per camera. * Fixed a bug where data rates weren't properly carrying over between configurations. v1.5.1724 * Added 12MP camera option. * Set framerate maximum to 120. * Re-implemented warning message. * Fixed a bug where loading a configuration wasn't properly restoring the option list. v1.5.1503 * Added pricing to the step 5 bill of materials. This supports the discount levels and currencies similarly to the product catalog. * Rearranged Analog camera compresion text to put H.264 support in the forefront. * Now suggests additional servers when the network traffic is over 75% capacity. * Total available network traffic is now properly multiplied by the number of servers selected on step 5. * Fixed a bug where stream quantities weren't updating with the parent camera. * Fixed a bug where some cameras would be reset to 30fps when loading a saved configuration. v1.4.1285 * Added support for ELX series. * Removed initial max servers setting. Server listings now sort by minimum server requirement. * IE8 users are no longer prompted to update to IE9. * Tweaked options for EL models. Bug Fixes * Removed an issue where deleting a camera row in the middle of the list would temporarily break the javascript. v1.3.983 * Added a minimum specifications server to step 5 for software-only configurations. * Added Enterprise + Edge licensing to software-only configurations. * Calculator now supports up to 999 cameras per row. * Added a clarification icon for resolutions on additional streams. Bug Fixes * Audio data rates should not be properly calculated. * IE9 users will no longer be berated for not using the version of the browser they're actually using. * Removed a few logging lines that IE doesn't support. * Network traffic no longer appears at 1000 times the size it should be. v1.3.724 * Added support for multi-streaming cameras. * Added ability to select a server configured with Quad NICs. * Encoders will now properly calculate the correct number of licenses for attached cameras. * Added network traffic calculations across the board. * Portal integration is now more prominently displayed in each header. Log in, people! * Updated option numbers. * Removed the legacy pop-up window on inital load. Bug Fixes * Updated motion instructions. * Imported configurations now properly handle resolution changes. * Analog cameras no longer reset to 15fps. v1.2.395 * Hard Drive surcharges are gone! * Replaced DOMPDF PDF generation with mPDF. * Minor formatting tweaks to the Excel export. * Configuration numbers are now randomly generated and include letters. * Discontinued several EL options. Bug Fixes * Selecting the Health Monitor will now force the Enterprise option on. * Selecting any other option will no longer force the Enterprise option on. * 4U A Series models now properly display the Redundant Power Supply option. * Input channels included with the IO card are now properly restricted. v1.2.269 * Updated jquery selectmenu extension. * Camera rows are now restricted to 999 cameras, up from 255. * START servers are now properly restricted to 16 analog and 16 IP cameras. * Increased accuracy of warnings regarding client/web connections. v1.2.207 * Added support for the customer portal. You can now log in to assign your account to a configuration. * Your configuration will now be saved whenever a file is exported. * Added a line in the help tab stating how to deal with multi-imager cameras. * Fixed a bug where switching compression types would incorrectly display the proper resolution. * Fixed a bug where loading a configuration would load an empty framerate. v1.1.187 * Added fix to properly calculate audio channels from cameras instead of directly to the server. * Added hard drive surcharge to the options list. * Removed out of data options from EL servers. v1.1.173 * Added an MPEG4/H.264 option for analog cameras. * Changed the way compatible servers are sorted in step 2. v1.1.164 * Correctly calculates frame rates for analog camera resolutions. * Calculator now supports 20M cameras. * Saved configurations will no longer set the frame rate to 30fps. * Minor speed/efficiency tweaks. v1.1.136 * Many updates to the camera list script. It now provides much more detailed information about the resolution + frame rate of each camera. * Added the ability to select a compression type for each camera. * The camera selections are now restricted to their maximum resolution + frame rate. * Updated resolution list with more accurate frame size data. * Updating a data rate by hand with now generate an approximate frame size. This data is not guaranteed to be accurate. * Updated the options with new Dual and Quad NIC options to reflect an upcoming catalog update. * Removed the ability to add a Health Server with incompatible servers. * Added a message to suggest a browser upgrade to people using IE7/8. * Created a script to generate the proper camera/server/powertrain XML files instead of forcing the calculator to contact Sugar every session. Bug Fixes * Fixed a bug that prevented IPS Start servers from appearing on the server list. * Fixed a bug that incorrectly calculated the total frame rate for all analog cameras. v1.0.124: * Added support for 20M cameras. * Fixed a bug that was causing some cameras to calculate rates using the wrong compression type. v1.0.120: * Corrected when errors for web/client connections are displayed. v1.0.118: * Added version number and changelog link to the Help tab. * Increased usability for mobile devices. * Fixed a logging bug that prevented IE7-8 users from seeing Step 5. * Corrected an issue related to multiple server selections and IP licenses. * Tweaked informational text regarding SSAs to be more clear. * Changed size warnings from a giant orange background to an astersisk. * Adjusted the maximum number of IP cameras available to use with START models. * Tweaked the PDF generator to stop crashing all of the time. Someday it will work as intended. * Some minor verbage changes. v1.0.95: * Live release. Check this file for updates to the calculator.