Monthly Archives: May 2010

Version 4.1 of exacqVision Video Management Software has just been released. This latest release, compatible with all exacqVision Hybrid and IP video surveillance systems, incorporates new features and enhancements, and continues our quest for rapid, incremental updates.

Version 4.1 is available for download here. Key features in the 4.1 Release:

• Serial Data over IP
• Viasys Video Analytics Support
• Serial Data export to ePlayer
• Expanded PTZ functionality
• Expanded Maps functionality
• Support for new IP camera models from Arecont, Ganz, IQeye, and StarDot

Here are some of the features in detail:

---

Serial Data over IP
Serial data can now be read over IP ports in addition to standard serial ports. A new window has been added to the Serial Port Setup page to configure the IP serial ports:

A close-up view of the IP Serial Setup window is here:

Up to 64 IP serial ports can be added per server, in addition to the standard RS-232 and RS-485 serial ports. IP serial port profiles are set up the same way as standard serial port profiles. Enabling serial over IP expands the ability of exacqVision servers to integrate with POS and ATM systems, access control systems, alarm systems, and video analytic systems, such as Viasys.

---

Viasys Video Analytics Support
Viasys is a vendor of video analytics software that resides on the edge and runs on Axis IP cameras, on IQeye Pro-line IP cameras. As analytic events occur, ASCII data is sent over the IP port. Through the use of serial over IP, an exacqVision server can read the serial data from this network port, and trigger recording and other actions based on the associated analytic events.

Viasys routines include intruder detection, perimeter protection, and alarming, and include ability for Adaptive Outdoor Analytics, 3D Video-Awareness, Electronic Fence/Trip Wire, Directional Detection and Sabotage Detection.

In addition to edge analytics, Viasys software also runs on any exacqVision server, enabling full video analytics capability for all IP cameras supported in exacqVision, including Arecont Vision, ACTi, Panasonic, Vivotek, StarDot, and more.

You can download a fully-functioning 30-day trial of Viasys software here. Demo videos of Viasys in action are here.

---

Serial Data Export to ePlayer
Serial data, whether from serial ports or IP ports, can now be fully exported along with associated video cameras. This export enables the serial data to scroll in real-time with what is happening on the cameras. As the video scrub bar is used to rapidly forward or reverse through video, the serial data scrolls rapidly as well; likewise as you rapidly scroll through serial data, the video stays in sync.

Here’s a sample screenshot of exported video and serial data in the ePlayer:

An exported clip of video and serial data in the ePlayer is available for download here
34.5 MB, requires reseller password

---

Expanded PTZ Functionality
With Version 4.1, additional commands have been added for mechanical PTZ cameras using the AD-422 and Pelco-D protocol, as well as for all analog and IP mechanical PTZ cameras.

Access PTZ Dome Menu – For Pelco and AD, you can now access the camera’s internal menu from within the exacqVision client (click images for a larger view):

More Joystick Commands – In addition, additional PTZ commands are now available from PTZ consoles and joysticks, including Menu On/Off, Run Patterns, and Flip.

Proportional PTZ via Mouse – New enhancements have been added for propotional PTZ control of mechanical cameras via a mouse. Graphical feedback appears showing the direction of the mouse. As the mouse moves farther from the center crosshair, the pan-tilt speed increases. This feature has always been available with PTZ joysticks, and is now available with the mouse:

Record Dome Patterns – Dome Patterns can now be recorded from within the exacqVision client. A new Dome Pattern section appears on a right-click of a PTZ camera setup:

Dome patterns, both those that have been recorded within exacqVision or recorded externally, can be accessed from the right-click PTZ menu:

Video Demo – Here’s a brief video demo of the new enhanced PTZ features in exacqVision 4.1:

---

Import/Export Maps
Enhanced ability to import and export graphics used for Maps. Export/Import buttons along with a status bar are now included in the System Setup page:

---

IP Camera Support Updates
Support for a number of new IP camera models has been added, including:

Arecont Vision – Support added for the new Arecont AV3135 D/N camera, as well as the new dual-mode AV10005 10-Mpixel/1080P IP camera

Ganz – Support added for the new CBC Ganz IP Dome Cameras ZN-D9312NHA and ZN-DN9312NHA

IQeye – Support added for the new IQeye HD1080P Series H.264 IP cameras. Usability improvements have also been added for the entire IQeye line, enabling port configuration and auto login.

StarDot – Support added for the new line of H.264 NetCam multi-megapixel cameras, models SDH500BN, SDH500B, SDH300B, SDH130BN, SDH130B.

---

Recent Releases
With this release we continue to make rapid progress with exacqVision, and incremental releases have hit about every 2 months. A large number of new features have been added in a short period of time. You can see the full release history of exacqVision here:
exacqVision Release History

Download and Installation
As always, the latest versions of exacqVision client and server software can easily and quickly be copied over existing versions while retaining all user settings. The latest versions can always be downloaded from the exacqVision Downloads page, or you can click on ‘Check for Updates‘ within the ‘About‘ box in the exacqVision software.

exacqVision Server software is available in both Windows and Linux versions, and the exacqVision client software is available in Windows, Linux and Macintosh native versions. Any version of exacqVision client can connect to any version of exacqVision server.